ESPBOX
Print Profile(1)
Description
Problem
I wanted a simple project box that will work for most projects with an ESP32/ESP8266 board. I'm mounting the sensors with some mounting tape and don't want to spend a lot of time messing around with screws and measuring. There are lots of very well done, low tolerance project boxes out there that need customization and specific board versions, I needed one that would just work.
Solution
This box has 5-10mm of slop on either side, or lets call it margin. The lid clips on nicely and the mesh has enough gaps to pass some wires through. For closet and garage monitoring this is chic.
Printing
Prints without supports, When inserting lid for first time, ease it in from an angle and friction will hold it together. A like is appreciated if you use this. ❤
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (1)