Ultimate Poop Bucket Riser Base

The poop bucket riser base is the ultimate poop bucket made for your ease for tight spaces to the back of your printer. 

This is the FINAL RELEASE of the Poop Bucket Riser unit. This unit is designed to be screwed together using heat inserts and screws for ease of assembly and disassembly if needed for future upgrades. Please see the attached guide for assembly.  

NOTES:

1) REV 1 Main Body is just the standard bodies, REV 2 is with the Hexwall incorporated!  The REV 1 and REV 2 bodies all fit together so you can mix and match as you wish!

2) REV 3 is the same as REV's 1 and 2, but the upper closeout rim has been removed and separated as an additional add on if wanted.  The upper portion where the rim will go will require additional heat inserts and more screws, this will all be noted in the assembly guide! This revision was updated to give the ability to save a little bit of filament and help reduce the massive amount of supporting on the build plate side of some of the parts.

3) Feel free to reorient the different parts in your Bambu project as desired, but when printing ensure that you block supports from the vertical Hexwall areas (I learned the hard way on accident!).

4) The Hexwall is designed off of rostap's (https://makerworld.com/en/@rostap) design, so any Hexwall attachment will work (ON THE OUTSIDE ONLY).

5) The folders contain the main bodies and rims, and the additional models are required with any of the folders chosen to complete the build of the poop bucket.

6) The upper tube is optional, I would recommend printing and attaching, but you may get some poop on your floor! Sometimes the poop rockets out of the shoot like its had too much Taco Bell!

Recommended to Print from PLA or Tough PLA

Approx. Overall Size of Riser: 19.58"L X 15.52"W X 7.25"H (497.33mm L X 394.21mm W X 184.15mm H) *Length is measured from the tip of the handle to the back of the poop tube*

Approx. Overall Size of Printer W/ Riser (Dimensions Based on X1C W/ AMS Closed and Anti-Vibration Feet): 19.58"L X 15.52"W X 34.94"H (497.33mm L X 394.21mm W X 887.38mm H) *Length is measured from the tip of the handle to the back of the poop tube*

Please like, download, and print this and let me know what you think and if there is anything you think should be added or changed!  

Thank you!  

Accessories:

Side Mount Spool Holder:

• REV 1 will be just standard inserts on the spool holder.
• REV 2 will have locking inserts that will allow the spool holder to screw to inserts on the inside of the poop bucket riser.  You will need 3 Heat inserts (M3x6x4.2 or 4.5) and 3 Screws (M3x20 or M3x23). 
• Link: https://makerworld.com/en/models/597663#profileId-522388 

Hex Lock:

• Heat inserts (M3x6x4.2 or 4.5)
• Link: https://makerworld.com/en/models/629547#profileId-554309 

Filament Guide:

• Screws M3x25
• PTFE Tubing, Stock size as provided with the Bambu Labs printers.
• Link: https://makerworld.com/en/models/629530#profileId-554295 

Feel Free to support my designs! https://buymeacoffee.com/arnzi