Obi-Wan Kenobi Lightsaber with Crystall Chamber

Axel Dreher
Props & Cosplays>Replica Weapon
Copyright Claim

Obi-Wan Kenobi Lightsaber with Crystall Chamber

Axel Dreher
Boost
1112
1733
107

Print Profile(4)

All
X1 Carbon
P1S
P1P
X1
X1E
A1
A1 mini
0.16mm layer, 2 walls, 15% infill
0.16mm layer, 2 walls, 15% infill
Designer
10.2 h
7 plates
4.9(28)
0.16mm layer, 2 walls, 15% infill for A1 mini
0.16mm layer, 2 walls, 15% infill for A1 mini
Designer
11.2 h
7 plates
5.0(4)
0.16mm layer, 2 walls, 15% infill for A1
0.16mm layer, 2 walls, 15% infill for A1
Designer
10.5 h
7 plates
4.4(5)
0.16mm layer, 2 walls, 15% infill
0.16mm layer, 2 walls, 15% infill
10.2 h
7 plates
3.0(1)
Open in Bambu Studio
Boost
1112
1733
107
244
1.2 k
274
Released

Description

UPDATE!!!
The illuminated Lightsaber Version is now ONLINE!    <Klick here>

Hello fans and friends of the Lightsaber,


After much research,

I have now completed my construction of the Obi-Wan Kenobi lightsaber from "A New Hope" with extendable Crystal Chamber.
It took me a lot of time to gather all the data together. But I hope I can make someone happy with it!

 

...and if you like it, I would be happy about a like!
Believe me, there is a lot of work involved.

If you like to add the Text too the Transistors you can use 
the “Transistor Decal”.
Print it on a Transfer Paper and cut it out.
Looks beautiful on my Lightsabers!!! ;-)

By the way, the Lightsaber Display Stand is also available here!
 
PS:   If I get enough boost I will create an automatically lit version!!!

starwars
star wars
lightsaber
lightsaber hilt
obi
obi wan
obi wan kenobi
obi-wan
obi-wan kenobi

Documentation (3)

Assembly Guide (3)
Anleitung - Eng.pdf
Anleitung - Ger.pdf
Transistor Decal.JPG

Comment & Rating (107)

Please fill in your opinion
(0/5000)
level
@ceo51378
Boosted
Awesome model with incredible attention to detail. The only issue I ran into was printing the silver 'Crystal Chamber' stand-offs. no matter what I changed in the settings- print speed, z hops, flow rates, etc, I could not get them to reliably print. my solution was to lay them down which resulted in a stronger part. I can't knock points off that because this was designed for an X1 which omits horizontal bed movement.
1
Reply
level
@AdmKolaszynski
Boosted
Do you have a bit more info or pictures of how you oreiented the stand-offs? Really struggling to get them to print on my P1S!
0
Reply
level
@ceo51378
Boosted
Replying to @AdmKolaszynski :
Basically you just need to rotate the standoffs 180 degrees so they are laying flat. then drop it down past the build plate just enough to have a flat side touching the build plate. I then printed it at .12mm to make them as smooth as possible. the flat side of the stand offs are facing inward so you don't notice the flat side.
0
Reply
level
@Green_DUCK_Door
what about if you change the bridging?
0
Reply
level
@novYmac
Boosted
Super Model 👍 wäre noch Mega wenn man einen Aufsatz für so ein collapsing lichtschwert vorne hätte
The designer has replied
1
Reply
level
@AxelDreher
...was meinst Du mit Aufsatz? 🤔
0
Reply
level
@novYmac
Boosted
sowas in der Art was dann vorne am Lichtschwert angesteckt werden könnte !
0
Reply
level
@novYmac
Boosted
so irgendwie in der Art 😂🙈
0
Reply
level
@DieGuteRute
Boosted
Obi van
The designer has replied
2
Reply
level
@AxelDreher
🤣👍
0
Reply
level
@Ds1gn
Boosted
Print Profile
0.16mm layer, 2 walls, 15% infill
perfect
1
Reply
level
@Krookr
Print Profile
0.16mm layer, 2 walls, 15% infill
had some printing issues (see picture). the model is great
1
Reply
level
@alvaropinot
Print Profile
0.16mm layer, 2 walls, 15% infill for A1 mini
Great quality
1
Reply
level
@akolp77
Boosted
Print Profile
0.16mm layer, 2 walls, 15% infill
Great design work!. Keep it up. Pretty Simple print, Requires a little patients. Tolerances are right on!
1
Reply
level
@SlowpoksWorksho
Boosted
Print Profile
0.16mm layer, 2 walls, 15% infill
great model
1
Reply
level
@Shaperd
Boosted
Print Profile
0.16mm layer, 2 walls, 15% infill
This is the most impressive model, wich i have ever seen! Great quality, very simple to print, and the most important thing, very very usefull assembly dokumentation. I love this lightsaber!😍 thanks.
1
Reply
level
@PoolHallKing
Boosted
Print Profile
0.16mm layer, 2 walls, 15% infill
came out great 🙂
1
Reply

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

Related Models

Obi-Wan Lightsaber with iluminated Crystal Chamber

Obi-Wan Lightsaber with iluminated Crystal Chamber

Axel Dreher
26
248
257
Lightsaber Keychain (Remix - solid end piece)

Lightsaber Keychain (Remix - solid end piece)

Valorian
1
15
32
Luke Skywalker's V2 Hero Lightsaber - ROTJ

Luke Skywalker's V2 Hero Lightsaber - ROTJ

ceo51378
5
42
38
Kenobi's Lightsaber

Kenobi's Lightsaber

Majogram
0
4
0
PrivacyTermsGuidelinesFAQCookie PolicyCookie SettingsHot Searches
© 2024 MakerWorld