JamesThePrinter

cover

p1.png

p2.png

plate_1.png

2024-08-09_ca60f2e0e09fc

Vase Mode - 0.9mm Line WidthPrint By Object8 Bottom Layers

Vase Mode - 0.9mm Line Width

LordAmok

Vase Mode Pencil Case max high 2.jpg

Vase Mode Pencil Case max high 1.jpg

Ich habe die Box für meine Dichtungshaken verwendet.Die Höhe habe ich auf die maximal mögliche für den P1S vergrößert und die Box auch etwas in der Breite und Tiefe vergrößert.Unterschiedlicher Rand je Objekt für besseren Halt hinzugefügt.

I used the box for my seal hooks.I increased the height to the maximum possible for the P1S and also increased the width and depth of the box slightly.Added different edge sizes per object for better hold.

Maximum height and slightly larger for P1S

FireDragon3D

2024-08-19_eb5b41f0471b08

70fb4940-5910-11ef-8631-a1c27857c61b.jpg.webp

I found the lid to be a bit loose so I scaled it down a few times to get just the right amount of friction to hold.

Tighter fitting lid - Vase mode

plate_2.png

Printin' Tarantino

IMG_1490.jpg

IMG_1490_(1).jpg

IMG_1491.jpg

I scaled this to nicely fit my entire pack of acrylic markers. Definitely better than the cardboard box they originally came in. Why the low rating? : Previously this print profile was poorly scaled. However, I&#39;ve since taken the time to scale it properly so that the lid actually stays connected now Because the print is tall and thin, if you&#39;re using an a1 printer, I would recommend slowing the print speed down to 50% once the printing process has started. Otherwise, it may print warped.  I hope you enjoy. Happy printing!

Scaled to fit entire set of Markers

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

This user content is licensed under a Standard Digital File License.

This pencil case is intended to be printed in vase mode. The two pieces slide together easily, but stay together with a slight bit of tension.&nbsp;&nbsp;Print SettingsVase Mode with 0.9mm line width is required! If you use a different line width, the two parts may not fit together or they may fall apart.I prefer 8 bottom layers to add sturdiness to the pieces.&nbsp;&nbsp;&nbsp;The following filaments were used in the pictures above:<ul><li>Bambu Lab Matte Marine Blue PLA</li></ul>

Vase Mode Pencil Case

Steve Bickle

Screenshot 2024-10-17 at 23.12.59.png

Vase Mode Sonicare Case.jpg

Vase Mode Sonicare Case

ASIA

Print Profile(4)

Description

Comment & Rating (244)

License

Remixes (1)
(Created before license restrict)

Related Models