Batman Lightbox
Print Profile(1)
Bill of Materials
- USB-C Plug x 1:
- Rocker Switch x 1:
Description
A Batman Lightbox designed in Fusion 360. There is the main body which is printed face down at a .2 layer height, then the back panel which is printed face up at the same layer height. The back panel has two cutouts for the USB-C connected to power the internal LEDS that are placed around the 10mm lip of the back plate, as well as a switch to turn the lights on and off. Links for the USB-C connector, Switch, and LEDS I used are below. There is also an optional diffuser component that can be used if pinholes are present, but the included profile should eliminate most/all of them.
Link for LEDs, Switches, and other components used: https://bit.ly/m/Additive-Imprints
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (2)