Print Profile(1)
Bill of Materials
- USB Cable With Switch x 1: https://www.amazon.com/dp/B09LHH3BW7?ref=ppx_yo2ov_dt_b_product_details&th=1
- Clock Movement 32mm Shaft x 1: https://www.amazon.com/dp/B09LHH3BW7?ref=ppx_yo2ov_dt_b_product_details&th=
Description
Lighted Clock Case For Lithophanes and Light Boxes
I wanted to create a one-of-a-kind gift for friends and family. This is the 240mm diameter lighted clock case only. The case is lit internally with an LED strip to display lithophane or light box images. Additional clock faces can be found here.
See my other collections:
More Lithophane and Light Box Clock Faces
Required materials:
1 x Clock movement with at least 25mm threaded shaft. I used these. Unfortunately, the shaft on the Bambu clock mechanism is too short.
1.4M of your preferred 5V LED light strip. Link for Bambu's light strip in the BOM section.
Optional USB cable with on/off switch. I used these.
Optional 2x 3x16mm machine screws to affix the ornate desk stand.
3x 3x8mm machine screws to affix the face to the frame.
Printing instructions
Clock Case: Use my profile or plate the components yourself. No special settings or supports are required. PLA or PETG.
Assembly Instructions
License
Comment & Rating (26)