Cogs / Gears Clock

Description

Please clean the print bed with dish soap and don't touch it with your fingers in the parts you are going to print.

• Use a Bambu clock kit or another similar clock kit.
• Simple to print and assemble. 
• No AMS needed for multicolor. The red hour numbers can be printed with only one manual filament change.
• The hour hand is also a cog which moves and shows the current hour.
• There is a minutes hand and another optional hour hand (in case you prefer instead of the cog hour hand).
• I like the thin seconds hand that comes with the clock kit, but I just painted the tip of it with red, to look better (in my opinion). You can also just grind the black color from it, to have an aluminum look, if you prefer.

You can use what combination of filaments you would like, but my choice (seen in the photos) is the following:

• cogs: Bambu PLA-CF Lava Gray - https://eu.store.bambulab.com/en-ro/products/pla-cf?variant=46702306296156
• minutes hand and numbers: Bambu PLA Matte Dark Red - https://eu.store.bambulab.com/en-ro/products/pla-matte-filament?variant=47794659164508
• plate holding the red numbers: Bambu PLA Matte Charcoal - https://eu.store.bambulab.com/en-ro/products/pla-matte-filament?variant=42996742750427

You can check all my models → here.
Or check my collection of my best models:

https://makerworld.com/en/collections/1921582-my-best-models