FFOrigine

NoticeFR.png

cover

Photoroom-20240805_222754.png

Photoroom-20240805_153945.png

Photoroom-20240805_154041.png

Photoroom-20240805_154222.png

Photoroom-20240805_154826.png

Photoroom-20240805_154909.png

Photoroom-20240805_154949.png

Clamp

plate_1.png

Arm x80

plate_2.png

modele.png

2024-08-05_40e614495fe8c

_(1).2024-08-05_c1c761fc5ce7c

Dummy Octopus - 2 Plates

ultiumdesigns

image_2024-11-16_145628256.png

unnamed.jpg

This is printed with the same settings as the original designer, but I made the stem a few mm longer so it grabs the chest frame hole a little better. I tested and this stays connected to the back much better than the original.&nbsp;-0.15mm layer, 2 walls, 20% infill

Slightly Longer Back Stem

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

This user content is licensed under a Standard Digital File License.

<h2>Dummy Octopus</h2>Oh non, Dummy Octopus est en ville !! Heureusement, Spider Dummy, équipé de l&#39;<a target="_blank" rel="noopener noreferrer ugc" href="https://makerworld.com/en/models/566001#profileId-485706">Iron-Spider</a>, est là aussi.&nbsp;Comme j&#39;étais lancé dans la création de l&#39;<a target="_blank" rel="noopener noreferrer ugc" href="https://makerworld.com/en/models/566001#profileId-485706">Iron-Spider</a>, je me suis dit que Peter Parker aurait bien besoin d&#39;un adversaire à sa hauteur. Et qui de mieux que le grand Docteur Octopus pour commencer ? (Oui, oui, pour commencer 🤫).&nbsp;<h2>PRÉREQUIS :</h2>✔ Une imprimante bien nettoyée et bien calibrée.✔ Un plateau propre (à l&#39;alcool isopropylique ou au savon si besoin) pour garantir une bonne accroche.✔ De la laque ou de la colle en bâton si vous voulez une adhérence encore meilleure.✔ Un filament de qualité… parce que sinon, imaginez une impression en carton 😅.&nbsp;<h2>IMPRESSION ET ASSEMBLAGE :</h2>Les pièces de la pince, sont assez difficiles à assembler, et c&#39;est voulu pour qu&#39;elles tiennent mieux par la suite. Elles vont s&#39;ajuster avec le temps si vous insistez un peu.Il y a 20 pièces par tentacule (sans compter la pince). Vous êtes libre d&#39;en imprimer plus pour allonger les tentacules et attraper Dummy Spider encore plus loin.Imprimé en PLA+, je n&#39;ai eu aucune casse lors du montage. Il est donc conseillé, voire fortement recommandé, d&#39;utiliser du PLA+ au minimum, voire du PETG (ou un matériau encore plus résistant pour une meilleure durabilité).Il s&#39;agit d&#39;une première version, j&#39;essaierai d&#39;améliorer le style, le design et d&#39;autres détails quand j&#39;aurai du temps.&nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000574356/design/2025-01-11_cb4daafc09a.png"></figure>&nbsp;Bon assemblage et amusez-vous bien, peu importe qui gagne entre les deux 😅.&nbsp;N&#39;hésitez pas à laisser un commentaire si vous pensez avoir aperçu un super-vilain. Un nouveau <a target="_blank" rel="noopener noreferrer ugc" href="https://makerworld.com/fr/models/1106430#profileId-1102341">méchant</a> est la !!! 😮<h2>MISES À JOUR :</h2>📅 17/08/2024 – Les plans sont maintenant disponibles.📅 05/08/2024 – Sortie de la V1 de Dummy Octopus.

<h2>Dummy Octopus</h2>Oh no, Dummy Octopus is in town!! Fortunately, Spider Dummy, equipped with the <a target="_blank" rel="noopener noreferrer ugc" href="https://makerworld.com/en/models/566001#profileId-485706">Iron-Spider</a>, is also here&nbsp;As I was creating the <a target="_blank" rel="noopener noreferrer ugc" href="https://makerworld.com/en/models/566001#profileId-485706">Iron-Spider</a>, I thought Peter Parker could certainly use a formidable adversary. And who better than the great Doctor Octopus to begin with? (Yes, yes, to begin with 🤫)&nbsp;<h2>PREREQUISITES:</h2>✔ A thoroughly cleaned and calibrated printer✔ A clean print bed (with isopropyl alcohol or soap if necessary) to ensure good adhesion✔ Hairspray or glue stick for even better adhesion✔ High-quality filament… otherwise, imagine a cardboard print 😅&nbsp;<h2>PRINTING AND ASSEMBLY:</h2>The claw components are rather challenging to assemble, intentionally so they hold more securely. They will adjust over time with a little persistenceThere are 20 pieces per tentacle (excluding the claw). Feel free to print more to lengthen the tentacles and ensnare Dummy Spider from even farther awayPrinted in PLA+, I experienced no breakage during assembly. Therefore, using at least PLA+, or even PETG (or an even stronger material for enhanced durability) is advisable, even strongly recommendedThis is a first version. I will endeavor to refine the style, design, and other details when I have time&nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000574356/design/2025-01-11_cb4daafc09a.png"></figure>&nbsp;Happy assembling and have fun, regardless of who wins between the two 😅&nbsp;Feel free to leave a comment if you think you've spotted a supervillain A new <a target="_blank" rel="noopener noreferrer ugc" href="https://makerworld.com/fr/models/1106430#profileId-1102341">villain</a> is here!!! 😮<h2>UPDATES:</h2>📅 17/08/2024 – The plans are now available📅 05/08/2024 – Release of the V1 of Dummy Octopus

Dummy Octopus - Dummy 13

ASIA

Print Profile(2)

Description

Dummy Octopus

PREREQUISITES:

PRINTING AND ASSEMBLY:

UPDATES:

Documentation (1)

Comment & Rating (1084)

License

Related Models