Hello. How did you get to the red part to look like rubber?

I just finished mine but i feel like the magnets just aren't strong enough to hold it in your head. Anyone have any other solution for this?

What did you use to dye the red parts?

Brother?

😂

how do you get the weathered red look?

can you add this print profile so we can all use it? I like the way you printed the main part together.

I'll add the process during the day 👍

wow what red pla is it?

looks amazing

how many magnets did it take you?

Thanks

any tips? my support keeps failing when it starts to print the rear of the main piece at around layer 650. seems like the tool head is hitting the tree support and knocking it over. I added some magnets inside the tree to help with adhesion and when it hit it shifted instead of falling.

hi mate we spoke earlier on Facebook I tried your magnet idea and failed the same way but it wasn't because it hit anything sounds weird but I think the magnets did something to the printer and made it shift over 5mm and failed almost straight away... but something that helped me was bigger brims and make sure your bed is cleaned properly with hot and I mean hot water and dish soap scrub it clean and then dry off with a paper towel and do not touch with your bare hands

did you get a fix on this? my print on the black eyes keep failing about half way through ?

Looks awesome after being weathered, got any tips on how to do that? Hopefully without any airbrushing!

Thanks. I used umber brown model wash watered down a little more and brushed it all over. I let it dry for a few mins and dabbed off the excess. the seam lines i added a little grey wash to darken it. It was actually my first time doing something like that was worried about making it look bad. I suppose there is no wrong way it just depends how weathered looking you want it.

Thank you for the tips, they massively helped and I've weathered mine now too. Really happy with the results and wasnt too hard to do!

Nice print, what filament did you use for the red?

Thanks. Bambu Matte PLA Dark Red

what filament did you use it almost looks like real leather

i realize part of that is the model but i mean the gloss/reflection wondering if you used anything in particular

not sure. from Amazon

if you did not scale the model down, get the 8x2mm magnets and some 7x2mm magnets because the fitting is sometimes a little hard to get right :)

No I didn’t touch the scale on that one, thanks for the advice 👍🏻

I used both 8x2mm and 7x2mm as well

can you plz specify what filaments you used? those colors are spot on for what I want!

I think the filament was creality white and black. for the main I sprayed it with krylon fusion all in one gloss burgundy

the print looks very good! how do the magnets fit into the holes at a scale of 105%?