Search models, users, collections, and posts
Alien Romulus
IP Report
Print Profile(1)
0.08mm layer, 2 walls, 100% infill
Designer
4.6 h
1 plate
Open in Bambu Studio
Boost
31
46
0
1
56
2
Released
Description
Project: Alien Romulus
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 200x150mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2.2mm
Filaments Used:
PLA PolyLite Black Transmission Distance: 0.3
PLA Paramount 3D Black Cherry Transmission Distance: 2
PLA Overture Red Transmission Distance: 4.8
PLA Paramount 3D Orange transparent Transmission Distance: 12
This print uses 4 unique filaments
Swap Instructions:
Start with Black
At layer #8 (0.72mm) swap to Black Cherry
At layer #13 (1.12mm) swap to Red
At layer #20 (1.68mm) swap to Transparent Orange for the rest.
Boost Me (for free)
License
This user content is licensed under a
Creative Commons Attribution-Noncommercial
Comment & Rating (0)