Mini Remote Control LED (11-20 buttons)
Copyright Claim
Mini Remote Control LED (11-20 buttons)
Boost
3
6
5
Print Profile(1)
0.28mm layer, 2 walls, 15% infill
Designer
15 min
1 plate
Open in Bambu Studio
Boost
3
6
5
0
13
29
Released
Description
Most of these remote controls measure 40x6mm, check before printing.
This model allows the insertion of the remote control including the lower protective plastic that protects the battery from consumption without use.
Its fixation can be done using 3 systems:
- 2 screws horizontally
- 6 combinable magnets: 2 of 15x2mm and 4 of 10x2mm
- Double-sided adhesive
It is designed so that the magnets are inserted from the inside with a thin surface of a bottom layer, enough so that the magnets do not come out but maintain their strength.
Comment & Rating (5)
All
Print Profile
0.28mm layer, 2 walls, 15% infill
I had to adjust it because I didn't have the right magnets, but once done and printed, it works works really well. Thanks
The designer has replied
1
Reply
Thanks for your feedback. What magnets did you have to use? Do you think I should upload another model with other sizes of magnets? Greetings!
PD: That addressable LED strip remote control also sounds familiar to me! 😜
(Edited)
0
Reply
Replying to @BS3DPrint
I used two old 12mm countersunk magnets I had lying around. They're probably not a popular size and it works now. Thanks anyway.
0
Reply
Print Profile
0.28mm layer, 2 walls, 15% infill
1
Reply
Print Profile
0.28mm layer, 2 walls, 15% infill
1
Reply
No more
License
This user content is licensed under a
Creative Commons Attribution-NoncommercialRelated Models
© 2024 MakerWorld