Elastic latch box - 160x100x45mm by Riccardo.B

Riccardo.B

Tools>Organizers

Print Profile(2)

All

X1 Carbon

P1S

P1P

X1E

A1 mini

Nice finish yet fast, Gyroid, [Tested], 0.16mm layer, 2 walls, 10% infill

3.9 h

1 plate

4.7(39)

60% Scale, 0.2mm layer, 2 walls, 10% infill

1.1 h

1 plate

4.7(42)

Boost

155

321

131

1.5 k

879

Released

Description

Box intended to be printed with PETG.

No hardware needed, lid snaps in place.

Latch is elastic.

box and lid

box

boxes

Comment & Rating (131)

@Infuse3Daus

Print Profile

Nice finish yet fast, Gyroid, [Tested], 0.16mm layer, 2 walls, 10% infill

great design, worked well, I ended up upscaling to 130% and a 0.28 layer height, in PLA original size inside for scale 😂

The designer has replied

@ValdiLab

Thanks for reviewing, I appreciate the feedback!

(Edited)

@user_1206685928

Print Profile

Nice finish yet fast, Gyroid, [Tested], 0.16mm layer, 2 walls, 10% infill

super mooie bak

(Edited)

The designer has replied

@ValdiLab

Thanks for reviewing, I appreciate the feedback!

@thom97ga

Print Profile

60% Scale, 0.2mm layer, 2 walls, 10% infill

Printed Great!! Trimmed a little on the hinge pieces so they weren’t soo tight as I printed with PLA. No issues at all!!

@branislav.polda

Print Profile

Nice finish yet fast, Gyroid, [Tested], 0.16mm layer, 2 walls, 10% infill

the corner lifted off the build plate, but that's more my fault for not cleaning it properly, Very useful simple box, thanks

The designer has replied

@ValdiLab

Thanks for reviewing, I appreciate the feedback!

@Ralphster

Boosted

Print Profile

Nice finish yet fast, Gyroid, [Tested], 0.16mm layer, 2 walls, 10% infill

Came out great, very smooth and feels good. Printed in Sunlu PLA+. One of the hinges had a part break off when I assembled it, but I’m blaming that on me. So be careful ;)

The designer has replied

@ValdiLab

Thanks for reviewing, I appreciate the feedback!

@Bumb1eris

Boosted

Print Profile

60% Scale, 0.2mm layer, 2 walls, 10% infill

10/10 best box

@WallaW80

Print Profile

60% Scale, 0.2mm layer, 2 walls, 10% infill

A1 Mini tutto bene. Ho stampato il coperchio all’1% più grande perché i concerti materiali calcetti rischiano di rompersi per il resto tutto perfetto.

@Zekrus

Print Profile

60% Scale, 0.2mm layer, 2 walls, 10% infill

Great print 😱

@herol

Boosted

Print Profile

60% Scale, 0.2mm layer, 2 walls, 10% infill

Sure, it's 60% of the size... But I would have expected that the dimensions given in the description are already final, but they are not. I ended up with a box that was too small.

(Edited)