if you click on "Raw Model Files", you'll find the .stl

Wiz_78

Hi, you mentioned there was a second version that snaps together. Do you have a link to it? I don't see it on this model

Victor Rodriguez

printed fine. I just need to learn how to set inserts.

cn4873

0.2mm layer, 5 walls, 20% infill

For those that rated lower than 5 stars. You may want to see the notes on my Print Profile for the Snap Together version. If you do what I said, it prints very well and looks good too. I have used 3 different PLA filaments and tested it out repeatedly..... 

mtaphorn

steinmannro

teaganmoreau

user_3567724474

Hydox42

cover

IMG_0785 - dimensioni grandi.jpeg

IMG_0783 - dimensioni grandi.webp

plate_1.png

plate_2.png

This one will require 4x M3x5.7 threaded inserts + 4x M3 x 10/12mm screws. Print the first plate twice.&nbsp;If you don't want to use screws, you can keep the second plate, printing 3 of those parts and replace the arched side part with the other one from the stl.

20240117_085158_6f1cdbd5-403b-42bb-bcbf-e970623c44f8.webp

20240117_085046_5f8cbf6c-ebca-4cf3-a1bf-81550ca473ea.webp

20240117_085230_cf1ffe1b-ef71-4e5e-9a28-9bb51c6e2895.webp

All the Snap Together Pieces are in this model (two plates).I rotated the two base components 180° to reduce the supports and make the top surface smoother.Changed the infill to Gyroid because my first attempt to print the long plank from the original model resulted in the nozzle getting caught on the Grid Infill and destroying the print after an hour and that was frustrating.My second attempt to print the result resulted in a usable plank but it had a split on the top surface that was due to excessive cooling so I reduced the minimum fan speeds in the filament settings for my filament to 30% so the fan wouldn't run too much and the results have been perfect ever since. I have printed additional sets of parts and they print well and look very nice…

ALL SNAP TOGETHER PARTS - GYROID - FEWER SUPPORTS 0.28mm layer, 5 walls, 20% infill

I wanted to place a monitor over a Mac Mini, to save desk space, so I created this.&nbsp;I made two versions: one mounts with screws, the other one simply snaps together (or you can glue it). I printed the first one for myself.

Print Profile(2)

Description

Comment & Rating (10)

License

Related Models

Adjustable futniture leg foot

Monitor Stand

Stand for Computer Monitor

Monitor Stand with LED Lighting Canal

Monitor stand/raiser