Watering Bottle Cap
Watering Bottle Cap
Boost
41
56
18
Print Profile(2)
0.2mm layer, 4 walls
49 min
1 plate
0.24mm layer, 2 walls, 15% infill
48 min
1 plate
Boost
41
56
18
1
143
153
Released
Description
- Convert any plastic water bottle into a watering cap or a portable dog shower. Fill your bottle with water, pull the portable outdoor shower lightly on the neck of the bottle, turn it over and press it together.
- Perfect for outdoor use. The portable dog shower is practical when you are out and about with your furry friend. Ideal for your dog or for yourself if nice.
- Perfect dosage: depending on the pressure on the bottle, you can easily dose the water jet.
- Can be used as a hiking shower, camping shower or portable beach shower. Rinses off sand, dirt and mud effortlessly; the shower time is more than a minute with a 2 litre bottle.
- Makes showering your dog quick, easy and more comfortable for your dog to enjoy showering.
Comment & Rating (18)
All
Print Profile
0.2mm layer, 4 walls
It's good but leaky
1
Reply
Print Profile
0.2mm layer, 4 walls
Printed with PETG and started at 50 percent to make sure all the little holes adhered properly to the bed. Worked great! fits snug on standard bottles! Printing another tonight!!! Had some issues with adherence using PLA at standard speed. I tried cleaning the plate and re-printing twice with no success.
The designer has replied
0
Reply
Yikes! I'll slow the profile down for PLA and maybe make the first layer thicker, that shouldn't harm anything.
0
Reply
Print Profile
0.2mm layer, 4 walls
We use this on a 2 L bottle filled with water to wash the sand off our feet before getting into the car! 2 L is enough to clean for peoples feet so you’re not tracking so much sand into the car! This model works very well! Some plumbers tape to the threads of the bottle and it won’t leak out the sides too! 10 out of 10, definitely use this for rinsing at the beach!!!
0
Reply
Print Profile
0.2mm layer, 4 walls
Nice design. Fits perfectly on a 1,5 liters soda bottle
0
Reply
Print Profile
0.2mm layer, 4 walls
The print profile itself works fine, but the design leaks on my bottles. Not the end of the world as I know so I pour carefully.
1
Reply
Print Profile
0.2mm layer, 4 walls
Awesome small print to recycle bottles. works a treat too!
1
Reply
Print Profile
0.2mm layer, 4 walls
top for growing
0
Reply
Boosted
Print Profile
0.2mm layer, 4 walls
Perfect with 2L. cocacola or similar bottles and a ring sealer.
0
Reply
Print Profile
0.2mm layer, 4 walls
Nice design and easy fast print.
0
Reply
Print Profile
0.2mm layer, 4 walls
Perfect fit =)
0
Reply
License
This work is licensed under a
Creative Commons Attribution-Noncommercial-NoDerivativesRelated Models
© 2024 MakerWorld