Search models, users, collections, and posts
Sign Holder cam_Make My Sign
IP Report
Print Profile(2)
0.2mm layer, 6 walls, 25% infill
Designer
31 min
1 plate
![Gyroid, [Tested], 0.16mm layer, 2 walls, 10% infill](https://makerworld.bblmw.com/makerworld/model/US57fd3d5853ea3/150740281/instance/2023-12-10_a0ba59eab49c3.jpg?x-oss-process=image%2Fresize%2Cw_100%2Fformat%2Cwebp)
Gyroid, [Tested], 0.16mm layer, 2 walls, 10% infill
33 min
1 plate
Open in Bambu Studio
Boost
255
534
161
28
2.3 k
1.1 k
Released
Description
This sign holder is equipped with a cam design, enabling it to accommodate signage with thicknesses ranging from 1 to 3mm.
Filament: 14.82g
Print time: 30m59s
Recommended filaments: PLA Basic & Matte
Hotend: 0.4mm Hardened Steel
*If printing with PLA basic filament, there may be a situation where the cam is too tightly bonded to the base. In this case, you can use a tool as a leverage to pry rotate the cam.
License
This user content is licensed under a
Creative Commons Attribution-NoncommercialRemixes (3)
Click to see more
Comment & Rating (161)