Super Mario fridge magnets - Free 3D Print Model

Description

Boost Me (for free)

Please, boost me! Thank you!

New SuperMario model in my profile, find it here! → https://makerworld.com/en/models/2049808-ikea-bolmen-supermario-toilet-brush-cover-no-ams#profileId-2212146

__________________________

Magnets for your fridge based in Super Mario, create your own design!

_________________________________________________________________________________

PACK 2 CAN BE FOUND HERE → https://makerworld.com/en/models/1429715-super-mario-fridge-magnets-pack-2#profileId-1486456

_________________________________________________________________________________

Designed for 6x1mm or 6x2mm magnets (better to use 6x1mm), simply add the magnets with some glue in the holes in the back. Depending on the size of the part, it has holes for magnets of 1 and 2 mm (Mario doesn't have cavity for the magnets, just glue it in the back)

Printed with 0.4mm nozzle and layer height 0.2mm. If you want more detail you can print Mario and Boo with 0.2mm nozzle

Looking forward to see your designs!

Check many of my fantastic designs in my profile → https://makerworld.com/en/@BenchyMaker/upload

More Super Mario magnets can be found in this model of SIR_PRINTSALOT → https://makerworld.com/en/models/971766-super-mario-magnet-grass#profileId-943553

Boost Me (for free)

Comment & Rating (289)

@MushroomKingdom

these all came out nicely apart from the ghost. I've tried a few times but can't get ride of the red bleed through. any tips?

The designer has replied

@BenchyMaker

increase purge volume between red and white, it should solve that issue

@MushroomKingdom

Replying to @BenchyMaker :

amazing, thank you

@SIR_PRINTSALOT

Boosted

Print Profile

BRICKS - 0.2mm layer, 2 walls, 10% infill

looks amazing!! I loved it so much that I decided to expand on it

@Mashers8

Where can I get them?

@SIR_PRINTSALOT

Boosted

Replying to @Mashers8 :

I made a few of the pieces shown in the pictures and the rest I uploaded as print profiles. You can find the print profiles in the description of my post here: https://makerworld.com/en/models/1165846-piranha-plant-magnet#profileId-1173136 and the grass here: https://makerworld.com/en/models/971766-super-mario-magnet-grass#profileId-943942

@Jotasct

Print Profile

BRICKS - 0.2mm layer, 2 walls, 10% infill

Perfect. The image shows one printed in gray

Show original

@FlorX

Print Profile

GREEN PIPE - 0.2mm layer, 2 walls, 10% infill

Merci

@FlorX

Print Profile

YELLOW CUBE - 0.2mm layer, 2 walls, 10% infill

Merci

@FlorX

Print Profile

MARIO (4 colors) 0.2mm layer, 2 walls, 10% infill

Merci!

@FlorX

Print Profile

BRICKS - 0.2mm layer, 2 walls, 10% infill

Merci!

@FlorX

Print Profile

STAR - 0.2mm layer, 2 walls, 10% infill

Merci!

@FlorX

Print Profile

BOO - 0.2mm layer, 2 walls, 10% infill

Super!

@namioto

The model is too small to print with a 0.4 nozzle. Please note that you will get satisfactory results only by using a 0.2 nozzle. (Of course, I am using Arachne) I am now trying to print again with a 0.2 nozzle at 120% magnification

Show original

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.