Painter Triangle (pyramid) quick print, stackable by dohara1985

dohara1985

Household>Other House Models

Print Profile(2)

All

P1S

P1P

X1 Carbon

X1E

0.2mm layer, 3 walls, 10% infill

Designer

11 min

1 plate

4.7(9)

0.2mm layer, 3 walls, 10% infill

Designer

37 min

1 plate

5.0(2)

Boost

Released

Description

A quick print, stackable Painters pyramid to keep your paint items raised with a small point of contact.

I've included to sizes. Roughly 46 mm tall and 23 mm tall.

23mm tall - 0.17 meters - Roughly 5 min print

46 mm tall - 1.22 meters - Roghly 30 min print

Comment & Rating (12)

@bermutrix

Print Profile

0.2mm layer, 3 walls, 10% infill

great!

@RevHazlett

Print Profile

0.2mm layer, 3 walls, 10% infill

I looked at it and thought "there's no way," but then, it was. Told Handy to make me 6 and it did. Perfect, thanks!

@lsymms

Print Profile

0.2mm layer, 3 walls, 10% infill

gave up after 3 failed attempts of smaller pyramids. using pla on pla cool plate with glue stick applied. smaller pyramids footprints almost always have one small edge that lifts up and all are to easy to dislodge when printing subsequent layers. edit: as Creator mentioneda brin would help. had similar problems on other models. took off all the glue stick and add a 5mm brim seems to do the trick

(Edited)

The designer has replied

@dohara1985

Ive never had issues, but it may be worth trying a brim and/or higher pate temp. I use hairspray and textured plate myself and have never tried the glue or engineering plate. Also make sure the aux fan is off (I learned this the hard way on other prints with a small foot print) I appreciate you trying multiple times before commenting.