Keychain Spinner - Print in Place
Copyright Claim
Keychain Spinner - Print in Place
Boost
18
37
13
Print Profile(3)
0.16mm layer, 3 walls, 100% infill
Designer
17 min
1 plate
Regular print, 0.2mm layer, 3 walls, 25% infill
13 min
1 plate
A1 mini, 0.16mm layer, 3 walls, 100% infill
20 min
1 plate
Boost
18
37
13
1
56
90
Released
Description
Designed with a 0.35mm clearance, a 16mm hole for a finger, and a 4mm hole for the keyring.
Warning
Do not press auto-arrange in your slicer otherwise this print will not work. The part is separated into 2 different objects to make it easier for AMS or other multi-colour printers. If you print directly from the Bambu Handy phone app and increase the number of copies, the app will auto-arrange the parts.
Slicing
- 0.16mm Layer Height
- 100% infill + 3 Wall Loops
- No supports
- No brim
Comment & Rating (13)
All
Print Profile
0.16mm layer, 3 walls, 100% infill
Spinns great
0
Reply
Print Profile
0.16mm layer, 3 walls, 100% infill
Spins really well!
0
Reply
Print Profile
0.16mm layer, 3 walls, 100% infill
perfect
0
Reply
Print Profile
0.16mm layer, 3 walls, 100% infill
很好玩的小东西ꉂ(ˊᗜˋ*)
(Edited)
0
Reply
Print Profile
Regular print, 0.2mm layer, 3 walls, 25% infill
good
0
Reply
Print Profile
0.16mm layer, 3 walls, 100% infill
super fun
0
Reply
Print Profile
0.16mm layer, 3 walls, 100% infill
ON THE GO FIDGET
0
Reply
Print Profile
0.16mm layer, 3 walls, 100% infill
nice
0
Reply
Print Profile
0.16mm layer, 3 walls, 100% infill
great print
0
Reply
Print Profile
0.16mm layer, 3 walls, 100% infill
0
Reply
License
This work is licensed under a
Creative Commons Attribution-Noncommercial-Share AlikeRelated Models
© 2024 MakerWorld