Cable Tie TPU
Copyright Claim
Cable Tie TPU
Boost
198
386
122
Print Profile(3)
TPU 95A 0.2mm layer, 2 walls, 100% infill
1.1 h
1 plate
A1-Mini-TPU_Cable_ties
1.1 h
1 plate
Shorter TPU cable ties (4 holes)
31 min
1 plate
Open in Bambu Studio
Boost
198
386
122
22
963
926
Released
Description
Cable Ties to be printed with flexible materials like TPU.
The sizes are:
- 90 mm
- 110 mm
- 130 mm
- 150 mm
- 170 mm
I printed the mounts in PLA - 3 Perimeter 20% Infill 0,2 mm layer height. But ASA or PETG will be a better solution for the long run if you place heavy things on the holder.
Have fun and keep printin!
Comment & Rating (122)
All
Print Profile
TPU 95A 0.2mm layer, 2 walls, 100% infill
have some problems but that's probably because I use TPU from sunlu instead of bambu lab
2
Reply
Make sure to dry the TPU and it might even be worth it to print with the spool actively in a dryer.
(Edited)2
Reply
Boosted
Print Profile
A1-Mini-TPU_Cable_ties
Awesome easy to print cable ties! Definitely comes in handy to keep the mess of cables I have under control, lol. Printed a bunch using NinjaFlex and zero problems. 👍🏻👍🏻👍🏻
0
Reply
Print Profile
TPU 95A 0.2mm layer, 2 walls, 100% infill
printed perfectly with Geetech TPU. Works great too.
0
Reply
Print Profile
Shorter TPU cable ties (4 holes)
it works but not pleasing to my eye. maybe i had wet filament.
0
Reply
Print Profile
TPU 95A 0.2mm layer, 2 walls, 100% infill
works well even with cheapest TPU filament from alix
0
Reply
Boosted
Print Profile
TPU 95A 0.2mm layer, 2 walls, 100% infill
Super einfach zu Drucken, gedruckt in Overture TPU
(Edited)
0
Reply
Print Profile
TPU 95A 0.2mm layer, 2 walls, 100% infill
works okay, but printing well
0
Reply
Print Profile
Shorter TPU cable ties (4 holes)
Overture TPU 95A HS (90mm/s)
0
Reply
Print Profile
TPU 95A 0.2mm layer, 2 walls, 100% infill
my new fav cable tie
0
Reply
Print Profile
TPU 95A 0.2mm layer, 2 walls, 100% infill
Ottimo
0
Reply
License
This user content is licensed under a
Creative Commons Attribution-Noncommercial-Share Alike
© 2024 MakerWorld