Heart shaped decorative planter
Heart shaped decorative planter
Boost
19
32
9
Print Profile(1)
0.2mm layer, 2 walls, 15% infill
Designer
10 h
1 plate
Boost
19
32
9
1
30
18
Released
Description
So my girlfriend wanted a heart shaped planter with brick like holes on the outer rim, that could fit decorative stones around the main planter body. So i made it happen. It was used as a decoration for a few graves for people that we miss a lot. Was printed in gray ASA for it's water, temperature and UV resistance.
Comment & Rating (9)
All
Print Profile
0.2mm layer, 2 walls, 15% infill
I love the design, but I struggled to keep the bottom of the heart from warping, probably due to its proximity to the chamber fan.
The designer has replied
0
Reply
Yeah, that could be it. However, i printed with asa, and my chamber fan was off, and got a slight warp in the corner. Maybe try reorienting the part? i have my chamber fan turned off for asa.
(Edited)0
Reply
Replying to @SreshMakes
That's interesting. I also used ASA, but it was also my first time using ASA. I had read that having the chamber fan on helped with ASA since it forced the air through the filter, but I will keep that in mind for future prints. Regardless, this made a great gift for my mother, and she loved it despite the slight warping.
(Edited)1
Reply
Replying to @ApatheticRiku
i’m really glad, she liked it. I wish you all the best in 2024.
0
Reply
Great result on the first attempt.
BBL ASA, 0.2mm layer, Standard and 0.4mm nozzle, no changes to default profiles.
BBL liquid glue on the Engineering Plate.
I set the orientation as per image after reading comments about the potential of the fan cooling parts too soon resulting in warping.
I also let the part cool inside the enclosed X1-C for over 30 mins. Even then, there were audible cracks and pops as the part released from the plate as it cooled even further.
(Edited)
0
Reply
For indoor use, an option for a base without holes in the planter section would be terrific!
0
Reply
I’ll add that this print is 75% of the original size.
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
(Edited)
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
0
Reply
No more
License
This user content is licensed under a Standard Digital File License.
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
© 2024 MakerWorld