Print Profile(1)
Description
A very simple three-part lamp.
The lamp is made in a three-part design, making it super easy to assemble with just four M3x8 screws. The lamp is designed with "easy printing" in mind, so it can be printed without support.
The base has a "press-fit" holder for an E27 socket that is 38 mm in diameter. I bought mine at the local Harald Nyborg (a Danish hardware store, but the brand of the socket is Gripo). You are more than welcome to remix my model to fit your desired socket.
There is a hole for a 15mm cord to pass through the bottom.
The bottom also have support for four 15mm felt or rubber feet.
The shade and inndershade of the lamp should be printed in Vase mode, which makes it flexible and better enables the light to pass through.
Here is what you'll need:
- 4 x M3x8 screws
- 4 x 15x2mm felt or rubber feet
- 1 x E27 socket (38mm for press-fit or remix the model to fit your socket of choice)
1 x cord with switch
- 1 x bottom
- 1 x shade
- 1 x innershade (optional)
Mix'n'Match with my other lamps!
https://makerworld.com/en/models/532801#profileId-449705
Hope you enjoy the lamp!
Feel free to like and share it.
Any and all feedback is welcome, and please let me know if you have requests for changes.
Remixing is allowed, but contact me for commercial use.
Boost Me (for free)
Boost me if you feel like supporting my design work! Thank you in advance! 😉
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (0)