Case for Flipper Zero Wi-Fi Module with Ruthex threaded inserts + Marauder skull logo version Remixed by salvatorepascuzzi

Remixed by

salvatorepascuzzi

Hobby & DIY>Electronics

Print Profile(3)

All

X1 Carbon

P1S

P1P

X1E

0.2mm layer, 2 walls, 15% infill

Designer

44 min

1 plate

4.8(26)

New Updatet Print Profile

51 min

1 plate

4.6(10)

0.08mm layer, 4 walls, 100% infill

2.5 h

1 plate

4.0(2)

Open in Bambu Studio

Boost

120

335

353

Released

Description

This is a remix of the fivesixzero's Case for Flipper Zero Wi-Fi Module to use it with Ruthex M2 threaded inserts and M2 screws instead of M3 screw + nut.

The screws needed are M2x7mm.

I also made a version with the Marauder Skull logo on it printable with the MMU2S or by adding pauses on a standard printer. This version is available in both M2 or M3 screws versions.

I also give you the svg and Illustrator logo I made and use for this model so you can use it in yours.

M2 threaded insert available here:

https://www.amazon.com/ruthex-Threaded-Insert-pieces-ultrasound/dp/B088QJG676/ref=sr_1_2?crid=1LDIVU9OR1RLS&keywords=ruthex+m2&qid=1671888709&sprefix=ruthex+m%2Caps%2C206&sr=8-2

For more informations about the Marauder, take a look at JustCallMeKoko's work here: https://github.com/justcallmekoko

Update V2.0: Added a case version to mount a board with the micro SD mod.

For more see: https://www.reddit.com/r/flipperzero/comments/y7v2mm/flipper_zero_wifi_dev_board_sd_reader_mod/?utm_source=pocket_saves

or https://www.tindie.com/products/justcallmekoko/wifi-dev-board-micro-sd-adapter/

Happy printing

Comment & Rating (40)

@hroller

Where's the m2x7 case for threaded inserts? When I open this it's got nut pockets...

@user_668154397

Boosted

Print Profile

0.2mm layer, 2 walls, 15% infill

very good fitting

@Youcrain

Print Profile

0.2mm layer, 2 walls, 15% infill

work well and fit pretty good

@user_484812875

Print Profile

New Updatet Print Profile

great print. thanks again!

@nlazega

Print Profile

0.2mm layer, 2 walls, 15% infill

fantastic!

(Edited)

@JakeMakes

Print Profile

0.2mm layer, 2 walls, 15% infill

Printed this completely remote and it came out excellent. I did another with my 0.2mm hotend when I got home to get a little better text.

@acehax

Print Profile

0.2mm layer, 2 walls, 15% infill

(Edited)

@jowenx1c

Print Profile

New Updatet Print Profile

Bed Adhesion Issue

Other Issues:printed this instead

@jefferson.huang

Print Profile

0.08mm layer, 4 walls, 100% infill

little warping

@MJCW

Print Profile

0.2mm layer, 2 walls, 15% infill

Dimensionally accurate and looks amazing in polymaker ABS in VoxelPLA PETG+. I also printed it in bamboo labs ABS glass fiber, but the texture felt like I had a little glass pieces in my hand.