This model has been updated as of November 1, 2023. The gorilla is larger now and the lid support has more surface area and a recess for the lid handle screws. This should be a much more stable lid support. I also remodeled the gorilla with a better pose for raising the lid.

If you're looking to lift the glass lid on your Bambu Lab printer temporarily, why not have a video game gorilla do it for you? This gorilla raises the front of the glass 46mm to provide sufficient venting when printing PLA.

This prints face down with 5 colors using a single AMS. To do this, choose the first layer printing order as 1-tan, 2-brown, 3-white, 4-purple, 5-black. Load your AMS with tan in slot 1, black-2, brown-3 and purple-4. Assign white and tan to the same AMS slot (1) when starting the print. As soon as tan finishes printing and switches to brown, replace the tan filament spool with white. The print will continue and all remaining white and tan layers will use white filament.

Don't forget to finish off the theme with the barrel handle. https://makerworld.com/en/models/98825#profileId-105363