Search models, users, collections, and posts
Tree Bookmarks
IP Report
Print Profile(1)
0.08mm layer, 2 walls, 100% infill
Designer
6.9 h
1 plate
Open in Bambu Studio
Boost
76
205
7
4
67
33
Released
Description
Project: Tree Bookmark.hfp
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 50.08x200mm in size
You may print at higher layer heights below the Min Depth of 0.64mm
The Max Depth is 2.2mm and the Actual Depth is 1.8mm
Filaments Used:
PLA Overture Matte Black Transmission Distance: 0.1
PLA Paramount 3D British Racing Green Transmission Distance: 3
PLA Overture Green Transmission Distance: 1.1
PLA Overture Matte White Transmission Distance: 3.7
This print uses 4 unique filaments
Swap Instructions:
Start with Black
At layer #10 (0.88mm) swap to British Racing Green
At layer #12 (1.04mm) swap to Green
At layer #17 (1.44mm) swap to White for the rest.
License
This user content is licensed under a
Creative Commons Attribution-Noncommercial
Comment & Rating (7)