spamoni

This is a solid mount, I made some minor changes to layer and infill amount and it is still very solid. The fit is super snug so I suggest putting the power cable through before sliding the camera in. I mounted mine with a command strip since the camera is light enough. Thanks for the model!

TheJeebo

works great. printed it for the kids room. thanks 

user_1017759508

0.2mm layer, 2 walls, 15% infill

Snug fit, quick print, worked great. I printed with just some generic PETG.

Printing_Sh1t

Fast, Strong, Clean: 0.20mm layer, 3 walls, 20% infill

simple yet exactly what you are looking for

cheesy 3D Printing

0.15mm layer, 2 walls, 50% infill

The Blob

jmonn1986

user_1999493711

Wriestcobra

user_3109811706

Mark Make's 3D

cover

Screenshot 2024-07-13 210755.png

v2mount 6.jpg

v2mount 5.jpg

v2mount 4.jpg

Screenshot 2024-07-13 213611.png

Screenshot 2024-07-14 103628.png

Screenshot 2024-07-14 103604.png

Screenshot 2024-07-14 114934.png

2024-07-13_238cb1c7a3a11.jpg

plate_1.png

20240814_114303.jpg

20240814_115905.jpg

20240814_114213.jpg

2024-08-14_bf9fca7654e8d

Lowered the infill and bigger layers for faster print time.

PXL_20241215_225009944.jpg

tynen

<h3>Critical Print Settings:</h3><ol><li>Layer Height:<ul><li>Layer height: 0.2 mm</li><li>Initial layer height: 0.2 mm</li><li>This provides a good balance of print quality and speed for functional parts.</li></ul></li><li>Line Width:<ul><li>Default: 0.42 mm</li><li>Keep this consistent with your nozzle size (0.4 mm) to avoid under- or over-extrusion.</li></ul></li><li>Top/Bottom Shells:<ul><li>Top shell layers: 5 → Ensures a solid top surface.</li><li>Bottom shell layers: 3 → Provides structural strength for flat areas.</li></ul></li><li>Wall Loops:<ul><li>Wall loops: 3 → Sufficient wall thickness for durability.</li></ul></li><li>Sparse Infill:<ul><li>Density: 25% → Balanced infill for strength without excessive print time.</li><li>Infill Pattern: Gyroid → Provides good strength and stability for functional parts.</li></ul></li><li>Seam Settings:<ul><li>Seam Position: Aligned → Ensures predictable seam placement.</li><li>Smart Scarf Seam Application: Enabled → Smooth transitions and better appearance.</li></ul></li><li>Precision Adjustments:<ul><li>Resolution: 0.012 mm → Fine detail for accuracy.</li><li>X-Y Contour Compensation: 0.15 mm → Reduces dimensional errors.</li><li>Elephant Foot Compensation: 0.15 mm → Helps with a cleaner first layer.</li></ul></li><li>Top Surface Pattern:<ul><li>Monotonic → Provides a clean, even top surface.</li></ul></li></ol><h3>Key Adjustments Summary:</h3><ol><li>Layer height: 0.2 mm</li><li>Wall loops: 3</li><li>Top shell layers: 5</li><li>Sparse Infill: 25% Gyroid</li><li>Seam position: Aligned, with Smart Scarf enabled</li><li>Precision tweaks: Elephant foot compensation and X-Y contour adjustments for clean edges.</li></ol>These settings ensure strength, dimensional accuracy, and clean surfaces for your functional part.

NOTE:  Switch the Download to STL to see all Models available.&nbsp;Wyze Camera V2 Mounts:<ul><li>single Camera Wall Mount</li><li>Double Camera Wall mount</li><li>Single Camera Soffit Mount</li><li>Double Camera Soffit Mount</li></ul>If yare are interested in the same mounts for the V3, V3Pro, or the V4 go to this link: <a target="_blank" href="https://makerworld.com/en/models/437122" rel="nofollow noopener">https://makerworld.com/en/models/437122</a>

Wyze Cam v2 Wall Mount

Global

Print Profile(3)

Description

Comment & Rating (16)

License

Related Models

TAPO camera wall mount

Corner/Edge wall mounts for Ikea Skadis

Corner Clamp Wall Mount

Buggati 42151 Wall Mount