Unicorn
Print Profile(2)
Description
It is suggested that the printing effect will be better with a 0.4 nozzle and 0.16 floor height. It is better to print the unicorn model with tree support. It is recommended to print in silent mode for the first 20 hours and then in standard mode. It is suggested that you can add some glue to fix it after printing 160 layers. The wings are thin, so be very careful when handling the support. The bracket can better fix the unicorn. Personally, I think the colored model is more amazing. This model is very beautiful and very decompression.
It is suggested to use a 0.4 nozzle and a 0.16 layer height for better printing results.
When printing the unicorn model, it is recommended to use tree support. It is recommended to print in silent mode for the first 20 hours and then in standard mode.
It is suggested that you can add some glue to fix it after printing 160 layers.
The wing part is relatively thin, so be very careful when handling the support.
The bracket can better fix the unicorn.
Personally, I think the colored model is more amazing.
This model is very beautiful and very de-stressing.
License
Comment & Rating (3)