massage roller
Copyright Claim
massage roller
Boost
102
156
49
Print Profile(2)
0.2mm layer, 3 walls, 15% infill
Designer
5.4 h
1 plate
0.12mm, 99% gyroid infill - BOLTS
52 min
1 plate
Open in Bambu Studio
Boost
102
156
49
1
288
381
Released
Description
You can fix the threads with instant glue
Comment & Rating (49)
All
Print Profile
0.2mm layer, 3 walls, 15% infill
It turned out very good :)
The designer has replied
0
Reply
Thank you
orange is the best :-)
(Edited)1
Reply
Print Profile
0.2mm layer, 3 walls, 15% infill
My sciatica thanks you 😆 and I love how sharp it is for scratching. I did have the screw ins break on me though, maybe was my silk filament. Either way nothing super glue can't fix. 👍
The designer has replied
0
Reply
Can print screws from vice perimeters and 100% fill.
Did you crack it where? Thanks for the feedback.
0
Reply
Print Profile
0.2mm layer, 3 walls, 15% infill
really nice massage roller. it's really nice on the back🤓 just remembered to use 80-100% Infiller for the bolts, they break easily ells
0
Reply
Print Profile
0.2mm layer, 3 walls, 15% infill
It prints well. But not a fan of the screw. Managed to break it. Haven't had the time to take it out yet.
Be aware!
Probably best to print is separate and use bigger infill.
0
Reply
A little question. The handle and roller is too slim and tall, they won't stick on the plate with adhesive.
Any idea to fix this?
I cut the roller into two parts and print perfect, but I don't want to do so on the handle.
(Edited)
0
Reply
Print Profile
0.2mm layer, 3 walls, 15% infill
Other Issues:the print profile added supports that are impossible to remove from the female thread in the handle
the bolts are also too tight to fit in the roller
0
Reply
Print Profile
0.2mm layer, 3 walls, 15% infill
0
Reply
Hi there, maker. Is this a "print in place" make (aka "print and go"), or it requires assembly post printing in order to be used?
The designer has replied
0
Reply
Replying to @StepanKTM
It consists of 6 parts.
The part into which the roller is inserted needs to be stretched to insert the roller.
0
Reply
Print Profile
0.2mm layer, 3 walls, 15% infill
Pins were impossible to insert (too large), but it works fine even without them.
0
Reply
Print Profile
0.2mm layer, 3 walls, 15% infill
came out awesome, my wife appreciates it lol. only thing I changed was the infill on the connecting screw to 100% my son broke it within the first 10 minuets
0
Reply
License
This user content is licensed under a
Creative Commons Attribution-Noncommercial-NoDerivativesRelated Models
© 2024 MakerWorld