Left-side AMS Buffer

I needed to relocate the AMS to the left side of my printer, while maintaining a good path for the PTFE tube.

Simple 2 part solution that allows the AMS buffer to be removed from the back of the printer, and then placed closer to the filament entry point.

I used heat-set nuts to take the M3 bolts originally used to hold the buffer on the back of the printer.

Then used two M3 x 30 and washers to mount the stand-off and backplate into place of the 2 case screws near the filament entry point.

The curved slot allows adjustment of the "angle of dangle". Once happy with the alignment, cut the PTFE tube from the buffer to the filament entry to length.