Phone Stand

Search models, users, collections, and posts

Takao

Tools>Gadgets

IP Report

Print Profile(3)

All

P1S

P1P

X1 Carbon

X1E

A1 mini

H2D

H2D Pro

H2S

P2S

H2C

X2D

A2L

[78] 0.2mm layer, 2 walls, 12% Gyroid infill

3 h

1 plate

4.9(218)

[149] Updated 0.2mm layer, 2 walls, 12% infill Gyroid

3.1 h

1 plate

4.9(81)

with charger hole 0.2mm layer, 2 walls, 12% infill

3.1 h

1 plate

5.0(38)

Open in Bambu Studio

Boost

882

2233

377

206

8.3 k

4.5 k

Released

Description

Well I made this myself on Fusion 360 and figured I would upload it for others. I print it at 100% infill and no supports for both the files. Usually the overhangs are pretty good on my p1s, but for the little stringys I get I hit the stand with a heat gun (or just use a blow dryer). I just made the little wall thing for fun and glued it onto one of my pre existing stands to hold my airpod case. This is the original one I made myself, I have everything to prove it if needed, but there are some copy's taking credit for this design out there on other websites.

Comment & Rating (377)

@O.Haupt76

Boosted

Print Profile

[78] 0.2mm layer, 2 walls, 12% Gyroid infill

Excellent model, simple to print

Show original

@user_158067928

Beautiful! What filaments did you use? And what colors?

@O.Haupt76

Boosted

Replying to @user_158067928 :

Thank you. The filament is Bambu Lab PLA Basic. Gray (10103) and Light Gray (10104)

Show original

@user_986102353

Print Profile

[78] 0.2mm layer, 2 walls, 12% Gyroid infill

queda genial

(Edited)

@Marcas

Boosted

Print Profile

[78] 0.2mm layer, 2 walls, 12% Gyroid infill

A somewhat large yet cool design

Show original

@Kwesibrew

How many hours did it take

@user_1627927702

Print Profile

[149] Updated 0.2mm layer, 2 walls, 12% infill Gyroid

a very nice print - great clean detail on the honeycomb, no stringing. I used a silver silk PLA & it holds my iPhone 16 plus

@waqas180

Boosted

Print Profile

[78] 0.2mm layer, 2 walls, 12% Gyroid infill

Quite a thoughtful in a useful design for storing batteries!

The profile uploader has replied

@Kilr0y

@waqas180 I think you're in the wrong place 😆

(Edited)

Show original

@firezr

Replying to @Kilr0y :

most definitely

(Edited)

@joshuarg2010

Print Profile

[78] 0.2mm layer, 2 walls, 12% Gyroid infill

It's very stable. Could even hold an ipad. I think Id prefer the phone hilder to be angled slightly higher, but thats it. Oh and also idk if it's just my printer or filament but there were a lot of strings in between the honeycombs. kind of a pain to remove all of them...

The profile uploader has replied

@Kilr0y

The threads can be easily removed with a soldering iron or a lighter.

(Edited)

Show original

@ScarzYourFace

Print Profile

[78] 0.2mm layer, 2 walls, 12% Gyroid infill

able to hold my s24 ultra with a dbrand case

@SorenneroS

Print Profile

[149] Updated 0.2mm layer, 2 walls, 12% infill Gyroid

great print!!

@Holbiad

Hello, Easy smartphone stand to print — the result is clean and very sturdy with four walls. There’s even a notch designed so you can charge the phone while it stays in place. Great and practical model, thanks for sharing it.

@Kink_ink_design

Print Profile

[149] Updated 0.2mm layer, 2 walls, 12% infill Gyroid

great print.

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.