Beautiful, easy and fast to print, once assembled little difficult to open it

ddd_printer

See description to change text 0.2mm layer, 3 walls, 25% infill

Right click and 'Split to objects', there's 3 parts in the assembly

Duane777

ovendoor

Excellent Design!!!! Printed a box for some M3 screws! The fit is exact!!! Couldn't be happier! Ty! Subbing for more amazing projects!

WoodenCreationz

daniel_pahlow

greg.stelmack

Piopps

Bonjour, j'aurais besoin d'aide svp !
Je parviens bien à modifier le texte mais je ne réussis pas à le replacer correctement.
Pouvez vous m'aider svp ?
Merci d'avance

affairesdu51

this is well made and prints perfect in pla

youtzssd

lipu445

alamondm

cover

Screenshot from 2023-10-30 20-55-00.png

plate_1.webp

plate_2.webp

plate_1.png

plate_2.png

remi.rafael

This profile divides the print onto two plates to limit the number of filament change.If you are not too familiar with bambu studio to change the text go to "Process" and select “objects”. Right click on “text shape” and select “change text” Adjust the text according to your needs, you may have to set the center of the text on the part and reset the angle to -90 degrees. In this setting the main body color corresponds to filament 2 and the lid and label are filament 1.

A replacement box for small hardware items bought from Aliexpress. Put your own text on the name plate and glue to the base. Fit the lid and push a piece of filament into the hole at the back to complete the hinge and trim the ends.The clip can be a bit tight initially but it will wear in, or you can just scrape a bit off the bump in the lid if you wish.Size: 130x70x27mm&nbsp;

Print Profile(1)

Description

Comment & Rating (23)

License

Related Models

Screw Box V2.0（Expandable）

Imperial bolts and nuts

Magnetic Screw Tray

BRICK BOX 2x2 with secret screw lid

Screw Box 130x70x25