Dr.Solertron

cover

2024-07-09_qfd4sefo5fp4.jpg

2024-07-09_sfrgg3fn1e5u.png

plate_1.png

Dominik_1992

70744be0-ebd6-46f3-bbed-b0ec41e7375c.jpg

· 0.2mm layer height; · print without support; · improved strength by wall×2, infill densilty 10%&nbsp;

MINI 0.2mm layer, 2 walls, 10% infill

Lulet

20260319_155707(1)(1)(1).jpg

20260319_160730(1).jpg

Modelo original + base. O modelo inicial deixava a desejar no quesito movimentação. Sem uma base, ao mover os lápis para outra superfície, todos caíam por baixo. Nessse modelo uma base foi adicionada, impedindo a queda dos lápis de cor. Como o modelo inicial foi testado e, mesmo com uma base, os lápis (Faber Castell, Prismacolor e Koh-I-Noor) pareciam tombar para fora, inverti o modelo (parte voltada para placa ficou para cima) e adicionei ele no meio, fazendo com que tivesse um suporte lateral, evitando que eles tombassem.

Original model plus base. The initial model was lacking in terms of mobility. Without a base, when the pencils were moved to another surface, they would all fall out from the bottom. In this model, a base was added, preventing the colored pencils from falling. After testing the initial model, even with a base, the pencils (Faber Castell, Prismacolor, and Koh-I-Noor) still tended to tip out. To solve this, I inverted the model (the side facing the build plate was placed upwards) and integrated it into the center, creating lateral support to prevent them from tipping over

0.2mm layer, 2 walls, 10% infill - BASE

It is now possible to select pen rings with pencil diameters ranging from 7.5 to 12.5mm - just select the STL file name with the size you need.The holes and inclinations are modified to suit from pencils to felt tip pens as well, depending on diameter.Feel free to play with scaling if you have pens that differ in dimensions from those included.

Print Profile(2)

Description

Comment & Rating (13)

License

Related Models

Colored Pencil Stand

Print Profile(2)

Description

Comment & Rating (13)

License

Related Models