Original art created by us, then we used Hueforge to create this 200x200 piece.
Please share your prints
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Filaments Used:
PLA BambuLab Matte Charcoal
PLA Polylite Natural
PLA BambuLab Basic Grey
PLA BambuLab Basic Jade White
Swap Instructions:
Start with Charcoal
At layer #4 (0.4mm) swap to Natural
At layer #11 (0.96mm) swap to Basic Grey
At layer #15 (1.28mm) swap to Jade White for the rest.