Search models, users, collections, and posts
IKEA 365+ 10.6l Drybox filament spool holder
Remixed by
IP Report
Print Profile(5)
0.2mm layer, 3 walls, 15% infill
Designer
7.7 h
3 plates
better fit for bearings and shaft
5.6 h
2 plates
cut and adapted for A1 mini
7.9 h
3 plates
Spool Holder without Rolls - 0.2mm layer, 2 walls, 5% infill
2.1 h
1 plate
Click to see more
Open in Bambu Studio
Boost
538
2043
315
292
2.4 k
1.4 k
Released
Description
Update:
I made a complete new version with a improved silica box with locking lids.
Alle parts are compatible to this one, so for example you can just print the new silica box and keep the other parts.
Was looking for a dry box and found the IKEA 365+ 10,6l container and @Twotone74 already designed a spool holder for it.
I did a quick and dirty remix to it, to better fit my needs:
- made it symmetrical, original it was 65+85mm, now it is 75+75mm Rolls
- resized the hole for the bearings, it was a big to bit
- added a version of the roll for use without bearings
- angled the underside edge to 35° so it's easier to print
- made a lid for the silica container
- resized the slot for the hygrometer (affiliate link), it's now a bit wider and without cutouts for the tabs, now all versions of the hygrometer should snap in, regardless of their tab positioning and you can just rotate it into correct orientation
You will need 8x 608 bearings (affiliate link) and 1xM3 screw for the silica lid.
Boost Me (for free)
If you like this model, please consider giving it a boost! Your support helps a lot.
Membership
See memberships options for commercial print licenses (remixes excluded).
Join
This remix is based on
License
If you want to use this model commercially, please join my membership.
Join Now
This user content is licensed under a
Creative Commons Attribution-NoncommercialRemixes (7)
Click to see more
Comment & Rating (315)