Simplified version of my previous project to internally illuminate the BambuLab P1P/P1S using the USB port behind the screen.
Unlike the previous version, this one includes a 5v LED strip, a USB cable and two magnets (⌀10 mm x 3 mm) as the only necessary components. The JST connector seen in the photo is superfluous and it is therefore possible to directly solder the USB cable to the LED respecting the polarities (black - and red +).
A further difference with the original project is the absence of a physical switch (to simplify assembly and soldering) and of an aluminum bar that helps to dissipate heat (for this reason it is recommended to print in PETG or ABS/ASA) and better spread the light.
.3mf file includes a 300 mm bar. In attached files, there is a 250 mm bar too
BOM:
Magnets: https://www.amazon.it/BUSATIA-Magneti-Rotondi-Neodimio-Calamite/dp/B07MMB2F45/ref=sr_1_5?crid=A2NRWFCQ5VAH&keywords=magneti+10x3&qid=1698607573&sprefix=magneti+10%2Caps%2C142&sr=8-5