John

cover

20231029_113025.jpg

In Place View.JPG

Section View.JPG

plate_1.png

20231029_113010.webp

20231029_113025.webp

In Place View.webp

Section View.webp

0.2mm layer, 6 walls, 25% infill

Coat Over

test8_2023-11-04-00-12-00-693.webp

test8_2023-screenshot.webp

test8_2023-11-04-00-11-37-747.webp

test8_2023-11-04-00-03-54-633.webp

test8_2023-11-04-00-04-15-131.webp

plate_1.webp

Instead of making a remix of this great riser, I played a little around in Bambu studio using negative parts to replace the pins with holes for M4-bolts. Goal was to replace the printed pins with M4 bolts (12mm) to make it stronger. Of course the holes are precisely placed. If you have an AMS on top, it feels more secure.With some effort you can thread the inner holes (3.4 mm) with the bolt itself. The holes at the outside are 4.2 mm so the bolt can move freely. Tighten the bolts until you have a good friction.

Riser with steel M4 bolts as hinge pin 

Guille

IMG_5125_67f20ced-cbe4-4b7a-950f-4973dd162bff.webp

IMG_5124_69ea1442-ee9c-4f94-8657-bac7274c9a92.webp

IMG_5122_16b6964d-b164-4afe-a79c-2ea5af169462.webp

IMG_5123_4efa7cfb-9690-4700-ba01-54ff39fd88f3.webp

I have to take into account when viewing the photos, to remove the 2 screws that hold the glass lifting tab, place the printed object and place the assembly with the two screws in its place.

Schacky

IMG_2146.webp

A1 Mini0,6mm NozzlePLA-CF

A1 Mini, 0.6mm nozzle, 0.18mm layer, 2 walls, 15% infill

Giulian

tempImagetx6M7z_cf3a37bd-bcf3-4801-bca5-b2633f65636e.webp

I printed this in ludacris mode (166%)! Printed flawlessly.<ul><li>.2 mm layer height</li><li>.4 mm nozzle</li><li>4 walls</li><li>20% infill (but 10% is more than enough.)</li></ul>

Printed at Ludacris mode (166%)!

Pluhár Márk

428981021_953384162904375_6029608093712733670_n_f7d17968-4495-417e-8ac6-7bf98e483f11.webp

Top glass riser, built to live with the handle so you never lose it. &nbsp;3D Print The World. For the people by the people. Allowable for remixes.

Glass Top Riser - print in hinge 

TekNik

P_20231101_222621.jpg

P_20231101_221956.jpg

Glass Riser Bambulab_ae9e0777-f5b6-4fd3-8e7a-df159d7934cc.png

Glass Top Riser BambuLab - Alzata Vetro Superiore BambuLab -  [REMIX] - v2

KenPrint3D

Screenshot_35.png

Screenshot_33.png

370516261_268160536209797_2619325720052620131_n.jpg

Screenshot_41.png

Screenshot_40.png

Screenshot_39.png

Screenshot_38.png

Screenshot_37.png

Screenshot_36.png

20231116_135120.jpg

Bambu Top Riser

ASIA

Print Profile(6)

Description

Comment & Rating (902)

License

Remixes (6)

Related Models