Drawer with different internal structures so you can choose the one that best suits you.
I have designed different internal structures so that you can put the one you like the most, or so that you can put different configurations if you print several drawers.

They are designed so that you can put different spare parts and tools for your printers, and thus have everything organized in one place.
Among the different internal structures, I have designed one with two heights and with a special space so you can store your nozzles from the Bambu Lab P and X series.

I have designed the external structure of the drawer in several pieces so that you can give the finish that you like best, according to your construction plates, to all the visible parts of the drawer. I have given these pieces a tolerance of 0.02 so that they fit snugly, so you will have to give them a few small taps to make them fit well, you can also use a little soap as a lubricant and give it a few small blows with a nylon hammer or similar, but carefully. This way it is not necessary to use glue for assembly.
Even so, I have created a 3mf as a tolerance test so that you can test before printing the entire drawer in pieces, since the tolerance can change slightly from one printer to another and ruin the whole job.

If you don't want to get complicated and you don't care that the finish looks the same on all surfaces, I have also designed an external structure to be printed in a single piece.

I have made the front of the drawer with the Bambu Lab logo and brand, but you have at your disposal another file with the front completely clean without any type of logo.

I have created several printing profiles, all with 3 walls and 15% 3D honeycomb infill, this way you ensure the robustness of the drawer even if you stack several together.

You have a profile with several printing plates with the entire external structure of the drawer broken down and with the internal structure clear, the rest are the different internal structures that I have designed.
I hope you like it.

Version 1.2
Added some more coupling to the top piece for a more stable assembly. Minor fixes for better assembly of the structure.
Reuploaded a new profile and corrected RAW files

Version 1.3
Solved fitting problems of the threads of the handle and the front of the drawer

Reuploaded a new profile and corrected RAW files

Version 1.4 (improved)
I have added a base with threaded holes to put legs on it, I have also added a top cover with holes for the legs to fit so that several drawers can be stacked on top of each other

Tex translate whith Google