Xbox Controller Stand with LED

Remixed by

Print Profile(4)

0.2mm layer, 2 walls, 15% infill
0.2mm layer, 2 walls, 15% infill
Designer
X1 Carbon, P1S, P1P, X1, X1E, A12.4 h
4.6
0.4mm layer, 2 walls, 10% infill QUICK
0.4mm layer, 2 walls, 10% infill QUICK
P1P, P1S, X1, X1 Carbon, X1E, A11.2 h
PLA 0.20mm
PLA 0.20mm
X1 Carbon, P1S, P1P, X1, X1E, A11.7 h
0.2mm layer, 2 walls, 15% infill
0.2mm layer, 2 walls, 15% infill
A1 mini, P1S, P1P, X1, X1 Carbon, X1E, A12.9 h

297
416
39
441
227
Released
Copyright Claim
Model
Comment & Rating
Remixes
Related Models

Model

Simple and clean looking Xbox Controller Stand with LED

Links to the LEDs and Batterybox I used in this project (not affiliated). Some links have several options in them, make sure to select the correct size

300mm 3V LED Filament: https://www.aliexpress.com/item/1005003775632413.html
2x1.5V Batterybox with switch: https://www.aliexpress.com/item/1005003517942515.html
8x2 Rubber Pads: https://www.aliexpress.com/item/1005005297036433.html

 

Subscribe or follow me on:

Instagram: https://www.instagram.com/agepbiz/
YouTube: https://www.youtube.com/user/agepbiz
Twitter: https://twitter.com/agepbiz

 

Printsettings:
No raft

15 Bottom Shells to minimize light leak
Support Structures where the batterybox will be attached. Avoid Supports where the LED groove is
0,1-0,2mm layer height


This remix is based on

Minimalistic Xbox Controller Stand

License

This work is licensed under a
Creative Commons Attribution-Noncommercial

Comment & Rating (39)

0/5000

Model Comment

great profile, is there a plan for a PlayStation controller? 😇(Edited)

0
Reply

i have one. maybe i can upload here. but its a remix and i forgot from where i have the original 🙈🙈

0
Reply

@Diginet does it use the same LEDs and battery box? I may have bought a whole bunch when I decided to do the Xbox controller haha

0
Reply

@Diginet I would also be interested in the PS5 version. I would like to print both as a Christmas present. :)

0
Reply
0.2mm layer, 2 walls, 15% infill

Great design! Everything fits perferctly in place. Looks better IRL than in the photo :)

0
Reply
Model Comment

Great design! Fits my Elite 2 perfectly. Unfortunately I'm bad with taking pictures. Looks much better irl.

0
Reply
0.2mm layer, 2 walls, 15% infill

Fits great, looks great. Haven't added the leds but you don't really need to. Looks good just by itself.

0
Reply
0.2mm layer, 2 walls, 15% infill

great model but if you try to print it directly from the bambu handy app using the designers file it will not work due to an inherit lack of support for the battery insert.

0
Reply
Model Comment

came out in very nicely! had to add supports to the edge where the lip of the battery box sits, but nbd.

0
Reply
0.2mm layer, 2 walls, 15% infill

fits the controllers perfectly but the filament got a little stringy around the led section. (I printed with the P1S.)

0
Reply
0.2mm layer, 2 walls, 15% infill

Great print and easy profile to use. The only thing I changed was place supports on the lip where the batter box sits. otherwise, great print! can't wait to give these as gifts

0
Reply
A1 - 0.2mm layer, 2 walls, 15% infill

0
Reply
Model Comment

@agepbiz: the link for the battery box is not working from my country, do you have another link? all I found where different designs

0
Reply

oh and the Edison Filament Lights won’t ship to Germany as well, but at least I could find other vendors who do send them.

0
Reply

Remixes (0)

There are no remixes yet