Parrot Treat Maze Accessory Kit - Free 3D Print Model

Search models, users, collections, and posts

milks808

Household>Pets

IP Report

Print Profile(3)

All

A1 mini

X1E

X1 Carbon

P2S

H2D Pro

P1P

P1S

H2S

H2D

H2C

X2D

A2L

A1 mini, horizontal bolt, slow first layer

Designer

1.4 h

1 plate

5.0(3)

P1S sliced 0.2mm layer, 999 walls, 15% infill

1.6 h

1 plate

5.0(4)

A1 Sliced 0.2mm layer, 999 walls, 15% infill

1.8 h

1 plate

5.0(3)

Open in Bambu Studio

Boost

292

214

Released

Description

Updated Oct25

As requested I've added a simpler, windowless treat container that doesn't require assembly. Despite being smaller it has the same internal volume as the standard container and is well suited to the beaks of medium sized parrots.

These parts are needed to make the treat container and cage mount for my series of parrot maze puzzles. You only need to print these once as they can be used with any of the mazes.

Printing and Assembly

All parts print without support. Printcage_mount_nut.stl with 100% infill for extra strength.

Choose a bright colour for the treat container and use the same colour to denote the exit of the maze puzzles, this may assist your parrot in working out the goal of each puzzle.

It's a good idea to print a clear section in the middle of the treat container, this will allow some light in so your bird can better see the treats inside!

You'll need small piece of clear plastic to make the window in the treat container, discarded packaging is a good source for this. Once you've cut the plastic down to size it is held in place with treat_container_window_nut.stl.

Once finished the treat container should look something like this:

Finished treat container

The cut out in the nut is designed to slot through a bar of your bird's cage, then when the nut is tightened in place the toy is attached securely. This can be attached to either horizontal or vertical bars.