PTFE PC4-M10 base mount airtight box lid / zilo1
Print Profile(2)
Description
I use this model for my plastic boxes, which I use to store my filaments without the risk of moisture and from which I print directly.
The PC4-M10 accept a 4mm PTFE tube.
Remove the small "blocker" that prevents printing with supports (see photo).
For the screw passage, you need to drill a 14mm hole (I used a conical drill bit, see photo).
If you need a device that allows spools to rotate and store silica desiccant, see the following links for the objects I use.
model 1: https://makerworld.com/en/models/526647#profileId-443606
If you need a cap for the PTFE PC4-M10 connector (In the case where no filament passes through the connector): GoHere !
Boost Me (for free)
Hit the Boost button 🚀 it's free and helps me keep designing stuff for the Bambu community.
A note on print quality: I test all my models before uploading. If your print doesn't turn out well, check your filament (old? wet?) and printer calibration first. Most issues come from these, not the model.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (50)