Papillon
Print Profile(1)
Description
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 180x180mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 1.5mm
Filaments Used:
PLA Black Transmission Distance: 0.3
PLA BambuLab Basic Gray Transmission Distance: 2
PLA White Transmission Distance: 6
This print uses 3 unique filaments
!!!! It appears you have mixed filament types. Be certain this is what you want. !!!!!
Swap Instructions:
Start with Black
At layer #8 (0.72mm) swap to Gray
At layer #15 (1.28mm) swap to White for the rest.
Boost Me (for free)
I printed all my creations myself. If you like my work, please send me support, it will help me earn more. Do not hesitate and send me if you have an idea for a nice picture. Thank you.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (1)