davidkelly021

cover

IMG-6525.JPG

IMG-6527.JPG

plate_1.png

Capture.webp

plate_1.webp

IMG-6525.webp

IMG-6527.webp

IMG-6528.webp

0.2 layer height15%infill can be scaled down to 85% i have not tried any smaller cooling 100%layer time 4sc

0.2mm layer, 2 walls, 15% infill

N* [Norkius]

1.png

PXL_20250824_150912415.jpg

PXL_20250824_151213797.jpg

PXL_20250824_151105445.jpg

Original profile had several issues with the bottom, it was not flat, and it was very thin as it only had 2 layers (0.40mm) in some spots holding the tentacles together. &nbsp;Using the cut tool I have flattened the bottom, and thickened the bottom of the tentacles to at least 5 layers (1.00mm.)&nbsp;I have also enabled arachne wall generator and random seam position in an attempt to make the tentacle joints stronger.

Flat and thick bottom

Made In Layers

Screen Shot 2026-04-13 at 9.03.03 PM.png

For A1 mini

HandyLab

kraken.jpg

photo_2024-09-11_09-36-54.jpg

photo_2024-09-11_09-36-42.jpg

0.2mm layer, 2 walls, 15% infill no brim

my print in place kraken no supports needed

kraken

ASIA

Print Profile(4)

Description

Comment & Rating (126)

License

Related Models