This is a harmless toy knife with a stripe design that retracts when you push or stab. you can use this to pretend to stab or just to fidget with. its an easy and fast print that is easy to assemble. only the 3 printed parts and one rubber band needed.

ASSEMBLY

.print the 3 parts

.hook a rubber band to the hook on the blade and the hook on the other piece (you can loop the rubber band if it is too long)

.out on the cover piece and you all done!!

(if the cover piece struggles to stay put you can add a little glue to the sides and then put on the cover)

(print the pieces upright for least supports)

(you don't need any supports for the cover piece)