Fidget Gears! Remixed for more tactile feel, less flex. Print in Place. Remixed by apt-get.fun

Remixed by

apt-get.fun

Toys & Games>Other Toys & Games

Print Profile(1)

All

P1P

P1S

X1 Carbon

X1E

0.17mm layer, 3 walls, 15% infill

Designer

57 min

1 plate

4.8(37)

Boost

121

253

Released

Description

Hi !

This is a DJ Remix on the original from NinjaDuck prints:

https://makerworld.com/en/u/2630895803

So all credits where they are deserved and check out his page! :)

I wanted a more of a tactile feel so added 2 extra lines ontop with differing height.

They also decrease the flex in this model slightly

As with my print profile on the original, my settings are for quality and durability and the speed of the print comes second

Hope you enjoy and will leave you with this James May quote

"Oh, C*ck..."

Comment & Rating (41)

@twilightstorm

Print Profile

0.17mm layer, 3 walls, 15% infill

Printed it slower, but came out great.

@markneilson10

Print Profile

0.17mm layer, 3 walls, 15% infill

printed great! easy snap to get it all moving. printed on P1S

@Themisto

Print Profile

0.17mm layer, 3 walls, 15% infill

Print came out visually as pictured, but did not actually spin. The gears did not have enough clearance. When trying to spin them, it took considerable force. So much that the gears broke off. It appears that one side was pretty functional and able to spin in place, but the other one is juiust a little off… it’s stuck to the internal axle, even now while broken it’s still hard to separate..

(Edited)

@bloodhound_sf

Print Profile

0.17mm layer, 3 walls, 15% infill

beautiful, works very well

@ecz.ozgurkumru

Print Profile

0.17mm layer, 3 walls, 15% infill

My second 3D print. It spins perfectly.

@Dak47922

Print Profile

0.17mm layer, 3 walls, 15% infill

turned out pretty well printed in PLA-CF

@k.matas

Print Profile

0.17mm layer, 3 walls, 15% infill

great print

@Bobschlag

Print Profile

0.17mm layer, 3 walls, 15% infill

A fun little gadget. I ran the edge of a sheet of paper between the gears, and it crimped the paper. Another cool feature.

@BlueDragyn

If you want to prevent the parts from separating when auto-arranging or printing more than one copy at a time, use the Assemble function in Bambu Slicer. Click the build plate. Right click to select all. Right click again and assemble. It binds them into one "object" without fusing anything together. Feel free to test it out. I think it'll do what you need and we can fill a build plate using the app.

@FuzzyDicePHL

Print Profile

0.17mm layer, 3 walls, 15% infill

Printed really well and even though the gears were tough to break loose, I was able to get them moving and it works really well now. Next time I'd remix it to have larger finger holes so adults can have fun, too!