Legendary Dwemer magecrafter Kagrenac wrought 3 artifacts to harness the power of Lorkhan's Heart, and this is one. Sunder, the hulking crystal-inset hammer, has made its way from Tamriel to our plane… via your 3D printer!

This great replica prints on 3 plates with minimal support cleanup and comes with its profile adjusted to make it easy to print while making sure surfaces come out nice and clean to make painting and finishing easy. The finicky inset symbol bits have been very well supported as they have a few overhangs and weak bits. If you find the symbol supports too hard to remove without damaging the overhang parts, you may consider using the provided alternative plate to print with fewer supports to clip away.

A build guide by the original author has been provided which details the very smooth build process, though it does require 2 6mm rods or dowels of 430mm length and 1 ice cream stick. These pieces are required for alignment and strength, but are relatively inexpensive and extremely easily acquired at hardware stores. The head is hollow and can be filled with material of your choice to add extra weight; I filled mine with gravel and it came to a weighty 2.2Kg fully assembled! Not recommended, but there are dowels provided on a separate plate to only be used if the model is for display purposes only and should be handled very gently when assembled.

This is a remix of Skyrim Sunder Dwemer Hammer by KAGR3NAC, licensed under CC BY-NC-SA.