luffy in alabasta from one piece hueforge
Print Profile(2)
Description
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 200x124.43mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2.3mm
Filaments Used:
PLA+ Numakers Pitch Black Transmission Distance: 1.6
PLA+ Numakers Nuclear Red Transmission Distance: 4.8
PLA+ Numakers Lemon Yellow Transmission Distance: 11
PLA+ Numakers Pure White Transmission Distance: 4.8
This print uses 4 unique filaments
Swap Instructions:
Start with Pitch Black
At layer #9 (0.8mm) swap to Nuclear Red
At layer #12 (1.04mm) swap to Lemon Yellow
At layer #18 (1.52mm) swap to Pure White
This slider is set higher than the mesh depth. It is not affecting your final mesh. Consider removing it.
At layer #47 (3.84mm) swap to Nuclear Red for the rest.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (0)