Based on my Frenchton (her name is Tipsy), she is half french bulldog & half boston terrier… it's not the best likeness but I love those pointy ears!

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 97.78x150mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2.2mm

Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA BambuLab Basic BambuLab Green Transmission Distance: 2
PLA BambuLab Basic Orange Transmission Distance: 5
PLA BambuLab Basic Jade White Transmission Distance: 5
This print uses 4 unique filaments

Swap Instructions:
Start with Black
At layer #8 (0.72mm) swap to BambuLab Green
At layer #13 (1.12mm) swap to Orange
At layer #20 (1.68mm) swap to Jade White for the rest.

Enjoy!