Evil Dead Movie Poster Hueforge
Print Profile(2)
Description
Evil Dead…..
The cabin used as the film's set was also lodging for the 13 crew members, with several people sleeping in the same room. Living conditions were terrible, and the crew frequently argued. The cabin didn't have plumbing, so the actors went days without showering, and fell ill frequently in the freezing weather. By the end of production, they were burning furniture to stay warm.
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 179.2x195.17mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 3.8mm and the Actual Depth is 2.5mm
Filaments Used:
PLA+ Numakers Pitch Black Transmission Distance: 1.6
PLA+ Numakers Pure White Transmission Distance: 4.8
PLA+ Numakers Nuclear Red Transmission Distance: 4.8
PLA+ IIID Max Yellow Transmission Distance: 5
PLA Default White Transmission Distance: 5
PLA Default Red Transmission Distance: 5
This print uses 6 unique filaments
Swap Instructions:
Start with Pitch Black
At layer #6 (0.56mm) swap to Pure White
At layer #7 (0.64mm) swap to Nuclear Red
At layer #10 (0.88mm) swap to Yellow
At layer #13 (1.12mm) swap to Nuclear Red
At layer #15 (1.28mm) swap to White
At layer #18 (1.52mm) swap to Yellow
At layer #20 (1.68mm) swap to White
At layer #28 (2.32mm) swap to Nuclear Red for the rest.
Comment & Rating (0)
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
