Kitchen dish cloth hanger that fits on the tap of the sink.

It was made to be as non.obstructive as possible and should fit any sink with a straight segment of the tap.

I printed in PETG to better sithstand the changing temperatures in a kitchen tap, but it could also work with PLA.

The original model fits 20mm sized pipes but can be modded (send a request) since the model is parametric. The length of the arm is 50 + 130mm.

My print was made using a 0.6mm nozzle and 2 outer walls. If a 0.4mm nozzle is used I would recommend using 3-4 walls for added rigidity.