Search models, users, collections, and posts

Printable rocket

Erwin
Toys & Games>Outdoor Toys
IP Report

Print Profile(4)

All
A1
P1S
P1P
X1 Carbon
X1E
X1
H2D
H2D Pro
H2S
P2S
H2C
X2D
A2L
A1 mini
0.2mm layer, 6 walls, 25% infill
0.2mm layer, 6 walls, 25% infill
Designer
4.5 h
2 plates
4.6(21)
All on one plate with smaller tip
All on one plate with smaller tip
2.7 h
1 plate
4.8(8)
0.08mm layer, 2 walls, 99% infill
0.08mm layer, 2 walls, 99% infill
10.2 h
4 plates
3.8(6)
0.2mm layer, 6 walls, 25% infill
0.2mm layer, 6 walls, 25% infill
4.5 h
2 plates
5.0(1)
Open in Bambu Studio
Boost
850
1927
180
64
1.6 k
787
Released 

Bill of Materials

List other parts
  • 1-2mm elastic x 1:
  • 1.3-1.5mm keblar thread x 1:
  • Flame resistant material x 1:
  • Plastic bag x 1:
  • Scissors, marker and ruler x 1:
  • Rocket Engine A6-4(or similar) x 1:

Description

Print your rocket. Requires some materials you can get on a hobby store. 

Assembly

 

Cut a piece of the 1-2mm elastic and 1.3-1.5mm keblar thread
Attach the keblar thread to the ring, pass it thru inside the side of the rocket body
Pull it from the front

 

Tie the elastic to the keblar

 

Attach the elastic to the tip

 

Prepare the parachute. I am using a plastic bag, distance between the points passing thru the center is 40 cm.
I added some sticker rings (check the RAW files for the SVG to cut your own). Cut 3 thin threads as shown

 

 

Attach the threads so the parachute takes form

 

Tie it to the tip. Pass all the 3 thread loops thru 2 holes, and then pass the whole plastic bag thru those loops, this way makes it easy to replace damaged parachutes

 

You need some flame resistant material to fill the inside

 

The second stage will push the filler with the tip and parachute. Now you can place the parachute inside and the tip at the end

 

You need rocket engines from your hobby store. Try A6-4 as a starting point. B4-4 and C5-7 are also ok.
The engine goes as shown. Put the wings
Use the lock to keep everything in place
Rocket is ready now. The wings have a hole for a metalic guide (or launch pad) you need to use. For ignition I am using this remote

Tips:

  1. Add extra “flame resistant material" the first time, otherwise the body of the rocket might explode in mid-air
  2. The tip should interface the rocket body with little friction
  3. It is safer to “crumple” the elastic, keblar, parachute inside than to wrap them tightly together (it might not deploy)

Have fun!

 

 

 

 

 

 

 

rocket
klima
toy

Comment & Rating (180)

(0/1000)

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

Related Models

Sprinkler Rocket
GIF
Sprinkler Rocket
Sevro
26.2 k
11.3 k
Air Pressure Rocket
GIF
Air Pressure Rocket
Patopato_Design
17.9 k
6.6 k
Rocket with Boosters (2 Sizes)
Rocket with Boosters (2 Sizes)
3DPmom
20.5 k
6.3 k
SpaceX Raptor 3 Rocket Engine
SpaceX Raptor 3 Rocket Engine
CrazyJ
9.4 k
4.1 k