Hallo,
jetzt gibt es ein Lichtschwert das sowohl beleuchtet als auch unbeleuchtet genutzt werden kann.
Der Zusammenbau ist einfach.
steckt den “Laser” der aus PETG Transulent gedruckt wurde in den aus PLA bestehenden Griff
schraubt das “Laser Kristallmodul” was auch aus PLA ist auf den Griff
setzt den “Lichtkristall” den bekommt man bei Amazon für 2-3 € ein -→ https://www.amazon.de/Joycabin-Taschenlampe-Aluminium-Handlampe-Nachtleuchtenden/dp/B0D2KRLYNY/ref=sr_1_4?__mk_de_DE=ÅMÅŽÕÑ&crid=13B0VQQEVQIEH&dib=eyJ2IjoiMSJ9.RKOWB74xS0OujtxJ-F615_xrohcPoL2UPxSIxKpYB2LGjHj071QN20LucGBJIEps.cwIX67Hi1VLZp8o5XiJO2HQAkR5RXMyZp6hjTTVBKgQ&dib_tag=se&keywords=Led+Taschenlampe+joycabin&qid=1719747622&sprefix=led+taschenlampe+joycabin%2Caps%2C389&sr=8-4
Schraubt den Deckel zu
einschalten und Spaß haben
was die Farben des Lasers betrifft sind keine Grenzen gesetzt ich habe einen in Rot (PETG Transulent) in Grün (PETG Transulent) und in Blau (PETG Transulent) gedruckt und alle 3 Leuchten schön. Sollte aber auch in einer hellen PLA Farbe funktioieren.
Wer kein Licht möchte nutzt einfach den alternativen Verschluss.
Viel Spaß beim Drucken und “Möge die Macht mit euch sein” :-)
------------------------------
Hello,
Now there is a lightsaber that can be used both lit and unlit. Assembly is easy.
1. inserts the “laser” that was printed from PETG Transulent into the handle made of PLA
2. screw the “laser crystal module”, which is also made of PLA, onto the handle Use
3. the “light crystal” which you can get on Amazon for €2-3 screws the lid closed
4.turn on and have fun
There are no limits when it comes to the colors of the laser. I printed one in red (PETG Transulent), green (PETG Transulent) and blue (PETG Transulent) and all 3 lights up beautifully. But should also work in a light PLA color.
If you don't want light, simply use the alternative shutter.
Happy printing and “May the force be with you” :-)